Admission

Eligibility Requirements

Students should meet the following requirements at the time of application:

Students must be enrolled in the Aerospace Engineering & Mechanics undergraduate program at the University of Minnesota-Twin Cities campus.
Students must meet a cumulative GPA minimum of 3.5.
Students must submit a viable 1-year plan with their faculty advisor meeting the IDP senior year plan.

Application Timing

Students apply to an integrated degree program the semester prior to the last year of undergraduate academic study, this provides the student with one year (two semesters) to complete undergraduate degree requirements and take graduate level courses.

Application Procedure

Students who wish to apply for admission into the program must submit the following at the end of their junior year (with two semesters remaining before graduation) to the Graduate School:

Completed Graduate School application form.
Necessary application fee.
Original transcripts from post-secondary education institutions.

Application Deadlines

Fall Admission

Opens on March 1st
Final deadline is May 1st

Application Review

Applications will be reviewed by the Director of Graduate Studies and other senior faculty members as needed. Processing application decisions will be completed by the Graduate Program Coordinator.

Application Decisions

Students will be notified of the outcome of their application via email by June 15th for a fall start.

Undergraduate Degree Progress

Students will meet with their faculty advisor during the spring semester of junior year as required for their undergraduate degree and draft a one-year plan for their senior year.

Students admitted to this IDP will complete and be awarded the undergraduate degree within 4 years (8 semesters) for NHS and 3 years (6 semesters) for NAS students. Admission into the IDP will be revoked if the awarding of this bachelor’s degree exceeds 8 semesters for NHS students and 6 semesters for NAS students.

Credits cannot be double counted (used for both the undergraduate and graduate degree requirements). This includes credits used for other undergraduate degrees, majors, or minors.

Credits for a course cannot be split between the undergraduate degrees, majors, or minors and graduate degree programs.

Courses that will be used to fulfill the master’s degree requirements must appear in the undergraduate degree sub-plan by the tenth day of the semester in which the student is enrolled in the courses. Any final edits or updates to this sub-plan must be reflected on the APAS no later than the last day of instruction in the semester in which the undergraduate degree will be awarded. Courses not in this sub-plan by that time cannot be updated later and, therefore, will not be eligible for use towards the master’s degree.

The associated bachelor’s degree must be awarded prior to the beginning of the master’s career. Bachelor’s and master’s degrees cannot be awarded simultaneously.

Students must obtain approval from the Director of Graduate Studies (DGS) if they wish to use courses taken as undergraduates toward their graduate program. Approved exceptions should then be processed in GPAS by the Graduate Program Coordinator (GPC).

The department advisor should review the APAS with the Director of Undergraduate Studies (DUGS) to approve any exceptions.

The Transfer Credit from Undergraduate to Graduate Program form should be completed and submitted to the Graduate Program Coordinator by the end of summer before the student begins their graduate program (after completion of their undergraduate degree). The student will be responsible for completing the form and obtaining their undergraduate advisor’s signature.

Admission to the graduate program is guaranteed providing the student meets the following requirements:

Students are guaranteed admission to MS program (1-year post-undergraduate studies) provided they meet the minimum cumulative GPA requirement of 3.5 and have submitted a one-year plan that aligns with IDP senior year plan.

Graduate Degree Progress

Once enrolled in the master’s degree, students must complete a minimum of two semesters (20+ course credits) as a registered graduate student completing the master’s degree requirements before the awarding of the master’s degree.

GPC is responsible for graduate academic audits.
GPC is responsible for reviewing graduate student degree progress.
DGS and GPC are responsible for graduate degree planning and advising
GPC is responsible for graduate degree clearance.

In coordination with the Director of Graduate Studies, the Graduate Program Coordinator will monitor and review the graduate students’ degree progress and conduct annual academic audits. The GPC will also assist students in graduate degree planning and confirm graduate degree clearance.

Approved Integrated Degree Program Course List

Students can apply a maximum of 10 credits taken during their senior year towards their master’s degree. The remaining 20 credits must be completed as an enrolled graduate student.

Students can mix the 10 credits from the approved Integrated Degree Program course list.

The 10 credits should come from graduate level courses (5xxx or 8xxx level courses)
Up to 8 credits of specified 4xxx courses may be applied to the 10 credits which can be transferred to the graduate program

4xxx level courses with equivalency to 5xxx level courses as listed below can be used to fulfil requirements for either the undergraduate and graduate program but not for both programs.

AEM 4247/5247 - Hypersonic Aerodynamics
AEM 4253/5253 - Computational Fluid Mechanics
AEM 4581/5581 - Mechanics of Solids

5xxx level and 8xxx level coursework

A maximum of 10 credits of 5xxx level and 8xxx level courses from the following list may be used to satisfy master’s degree requirements as part of the integrated bachelor's/master’s program.

AEM 5247 - Hypersonic Aerodynamics (3 cr)
AEM 5253 - Computational Fluid Mechanics (3 cr)
AEM 5321 - Modern Feedback Control (3 cr)
AEM 5333 - Design-to-Flight: Small Uninhabited Aerial Vehicles (3 cr)
AEM 5401 - Intermediate Dynamics (3 cr)
AEM 5431 - Trajectory Optimization (3 cr)
AEM 5451 - Optimal Estimation (3 cr)
AEM 5501 - Continuum Mechanics
AEM 5503 - Theory of Elasticity (3 cr)
AEM 5581 - Mechanics of Solids (3 cr)
AEM 5651 - Aeroelasticity (3 cr)
AEM 8000 - Seminar: Aerospace Engineering and Mechanics (1 cr)
AEM 8201 - Fluid Mechanics I (3 cr)
AEM 8202 - Fluid Mechanics II (3 cr)
AEM 8203 - Fluid Mechanics III (3 cr)
AEM 8207 - Hydrodynamic Stability (3 cr)
AEM 8211 - Theory of Turbulence I (3 cr)
AEM 8212 - Theory of Turbulence II (3 cr)
AEM 8213 - Turbulent Shear Flows (3 cr)
AEM 8221 - Rheological Fluid Mechanics (3 cr)
AEM 8231 - Molecular Gas Dynamics (3 cr)
AEM 8232 - Physical Gas Dynamics and Molecular Simulation (3 cr)
AEM 8233 - Multi-phase Flows: Fundamentals, Measurement, and Modeling (3 cr)
AEM 8241 - Perturbation Methods in Fluid Mechanics (3 cr)
AEM 8251 - Finite-Volume Methods in Computational Fluid Dynamics (3 cr)
AEM 8253 - Computational Methods in Fluid Mechanics (3 cr)
AEM 8261 - Nonlinear Waves in Mechanics (3 cr)
AEM 8271 - Experimental Methods in Fluid Mechanics (3 cr)
AEM 8290 - Topics in Fluid Mechanics (1-4 cr)
AEM 8293 - Directed Studies in Fluid Mechanics (1-3 cr)
AEM 8295 - Selected Topics in Fluid Mechanics (1-4 cr)
AEM 8400 - Seminar: Aerospace Systems (1 cr)
AEM 8411 - Advanced Dynamics (3 cr)
AEM 8415 - Formal Methods for Dynamical Systems (3 cr)
AEM 8421 - Robust Multivariable Control Design (3 cr)
AEM 8423 - Convex Optimization Methods in Control (3 cr)
AEM 8426 - Optimization and System Sciences (3 cr)
AEM 8442 - Aerospace Positioning, Navigating and Timing (3 cr)
AEM 8451 - System Identification: Theory and Applications (3 cr)
AEM 8453 - Model Reduction and Approximation of Dynamical Systems (3 cr)
AEM 8490 - Topics in Aerospace Systems (1-4 cr)
AEM 8493 - Directed Studies in Aerospace Systems (1-3 cr)
AEM 8495 - Advanced Topics in Aerospace Systems (1-4 cr)
AEM 8500 - Research Seminar in Mechanics of Materials (1 cr)
AEM 8511 - Advanced Topics in Continuum Mechanics (3 cr)
AEM 8521 - Advanced Topics in Elasticity (3 cr)
AEM 8523 - Elastodynamics (3 cr)
AEM 8525 - Elastic Stability of Materials (3 cr)
AEM 8527 - Pattern Formation and Bifurcation in Materials (3 cr)
AEM 8531 - Fracture Mechanics (3 cr)
AEM 8533 - Theory of Plasticity (3 cr)
AEM 8541 - Mechanics of Crystalline Solids (3 cr)
AEM 8551 - Multiscale Methods for Bridging Length and Time Scales (3 cr)
AEM 8553 - Data-Driven Molecular Simulation (3 cr)
AEM 8590 - Topics in Mechanics and Materials (1-4 cr)
AEM 8593 - Directed Studies in Solid Mechanics and Materials (1-3 cr)
AEM 8595 - Selected Topics in Mechanics and Materials (1-4 cr)

4xxx upper-level limited coursework

A maximum of 8 credits of 4xxx level courses from the following list may be applied to the 10 credits which can be used for the master’s degree requirements.

AEM 4247 - Hypersonic Aerodynamics (3 cr)
AEM 4253 - Computational Fluid Mechanics (3 cr)
AEM 4290 - Special Topics in Fluid Mechanics (1-3 cr)
AEM 4293 - Directed Studies in Fluid Mechanics (1-3 cr)
AEM 4305 - Spacecraft Attitude Dynamics and Control (3 cr)
AEM 4333 - Aerospace Design: Special Projects (3 cr)
AEM 4490 - Special Topics in Aerospace Systems (1-3 cr)
AEM 4493 - Directed Studies in Aerospace Systems (1-3 cr)
AEM 4502 - Computational Structural Analysis (3 cr)
AEM 4511 - Mechanics of Composite Materials (3 cr)
AEM 4581 - Mechanics of Solids (3 cr)
AEM 4590 - Special Topics in Solid Mechanics and Materials (1-3 cr)
AEM 4593 - Directed Studies: Solid Mechanics (1-3 cr)

Aerospace Engineering and Mechanics B.A.E.M.

Download as PDF

Description

Program details

Admission details

Requirements

Contact information

Sample plan

Learning outcomes